How To Fix Razer Deathadder Double Click Issue?

Double Click is a serious and pervasive issue that affects all Razer mice. How to Fix Razer Deathadder Double Click Issue?

It was initially reported years ago, and while the frequency of incidents may have decreased since Razer acknowledged the problem and rectified it in a firmware update, it remains a major concern.

It’s a problem that many different gaming mice have. In this article, I’ll explain how to resolve the Razer Deathadder double-click problem.

There’s a trick you can use to attempt to repair it: A static charge can build up on the toggle switch that controls the ‘button.’

Breathe a few times into the space between the button and the mouse’s base (the slit that allows the button to move and ‘click’) to assist release it.

What is /storage/emulated/0/? How to Access it?

Most of the time, the static buildup will be dissipated by the humidity in your breath, and the button will stop double-clicking.

Razer Deathadder

How to Fix Razer Deathadder Double Click Issue?

What is The source Of the Issue:

The most typical source of multiple clicks is software, however static charge accumulation can also be the culprit. Faulty mouse switches might potentially create the double click issue in very rare circumstances. 

I have included several possible solutions below; attempting each one at a time should solve the problem.

Razer Double Click Problem Fix?

Now and again, it happens to all of us: we click once and then mistakenly double-click. But what if your Razer mouse is doing a double click on a single click? The first several fixes will assist you in swiftly resolving the issue.

Fix # 1: After the update, go back to the previous state:

A few customers have reported that their Razer mouse is clicking twice after installing Windows updates. If you suspect the problem is related to a recent update, attempt the following actions to resolve it:

  • To access the Power User Menu, hold down the Windows key and the X key at the same time.
  • Select “Device Manager” from the drop-down menu.
  • When this window appears, double-click your Razer Deathadder mouse to bring up the “Properties” option.
  • Navigate to the “Driver” tab and select the “Roll Back Driver” button.
  • Allow time for the roll-back procedure to complete.
  • Your computer should be restarted. Wait for it to restart. 

If the problem is still not solved with this fix then move to the next fix.

Fix # 2: Reset the mouse’s settings:

Another typical cause of double-clicking on your Razer mouse is incorrect click speed settings. It may be necessary to reset them for the mouse to function correctly.

  • Connect the mouse to the computer then disconnect it.
  • Hold the Right, Left Mouse Button, and Scroll Wheel together for a few seconds.
  • Connect the mouse to the computer while holding down the mouse buttons.
  • Release the buttons after 5–10 seconds. This will reset the mouse, perhaps resolving the issue with double-clicking.

Fix # 3: Examine your power management system:

The following remedy for a double-clicking mouse Razer Deathadder has to do with the USB Root Hub’s power management settings. This may appear to be difficult at first, but it is pretty simple once you get started.

  • To enter the Power User Menu, press the Windows Key and the X key at the same time to start your Device Manager. 
  • From the menu select Device Manager.
  • Click the carrot in the Universal Serial Bus controllers section to enlarge it.
  • To open the properties for the USB Root Hub, double-click on it.
  • Under “Power Management,” check Allow the Computer to Turn off This Device to Save Power.
  • Click Apply and then OK to preserve your changes.
  • Carry out the same procedure for all of the USB Root Hub devices.
  • To ensure that the modifications take effect, restart your computer.

Fix # 4: Allow the static charge Buildup:

A static charge can build up on mouse switches, causing the double click problem. You can discharge the charge by softly breathing or blowing damp air into the space between the button and the mouse.

What Does MIP 67 Error Mean On Android?

Some individuals breathe into the gap and believe it was repaired because the switches were dirty, however, the humidity in the breath helps to remove the static charge accumulation.

Antistatic sprays are available on the market, but it’s preferable to softly blow damp air or breathe into the gap. Before attempting this procedure, bear in mind that you may need to breathe air from various angles 4-5 times.

Fix # 5: Switch Buttons: (How to Fix Razer Deathadder Double Click Issue?)

If your Razer Deathadder double-clicking problem persists, something is probably wrong with your mouse’s hardware, not the software.

To see whether it’s a hardware problem, swap the left and right mouse buttons and see if the problem returns. Follow these steps to accomplish this:

  • Press the Windows Key and the S key at the same time to bring up the Control Panel, then type “Mouse & Touchpad Settings” into the search box.
  • When the menu appears, look for the option that reads “Select Primary Button.” For the primary button, choose “Right.”
  • Click Apply, then OK to keep changes.
  • It’s time to restart your computer.
  •  You need to try using your mouse in this manner for a few minutes.

Fix # 6: Increase the speed of double-clicking:

From the Windows control panel, you may adjust the speed of double-clicking. This isn’t a true solution; rather, it’s a workaround for the double-click problem that works.

  • Go to the control panel on your PC.
  • From the drop-down menu, select the Mouse option.
  • To enhance the double click speed, go to the buttons tab and utilize the slider.

The system will not register the erroneous click if the clock speed is increased. You may have defective switches if you still have the double click problem after doing this.

Fix # 7: Update Razer Deathadder Firmware:

Gaming mouse firmware, like the firmware of other devices such as smartphones, is a software program that gives the mouse vital instructions. 

When the double-click problem was originally discovered, Razer encouraged anyone who was experiencing it to upgrade the mouse’s software.

  • On your Windows PC, install Razer DeathAdder 2013 double-click firmware or DeathAdder Chroma Updater.
  • Launch the Updater after installing it.
  • To upgrade the firmware, follow the on-screen instructions. 
  • Keep in mind that the mouse will become uncooperative during the upgrade.

Conclusion:

I hope you have learned about how to fix Razer DeathAdder double click issue. So I’m hoping that my article will save time, release stress, and perhaps even the loss of a perfectly good and costly mouse.

Keep in mind that using just one solution might not solve the problem; if that’s the case, I recommend trying all of them until one of them does.

Leave a Comment